Computer power supply specs

Computer power supplies are rated based on their maximum output power. Typical power ranges are from 300 W to 500 W . Power supplies used by gamimg solutions sometimes range from 500 W to 1300 W. A common way to reach the power figure for PC PSUs is by adding the power available on each rail, which will not give a true power figure. This means that you cannot use the PSU maximum rating on one rail, but only as a total. Therefore you can overload a PSU on one rail without having to use the maximum rated power.

Computer power supply pins

1. PC Main power connector: Is the connector that goes to the motherboard to provide it with power. The connector has 20 or 24 pins. In cases where the motherboard has a 24-pin connector, some power supplies come with two connectors (one with 20-pin and other with 4-pin) which can be used together to form the 24-pin connector.
2. ATX12V 4-pin power connector. A second connector that goes to the motherboard (in addition to the main 24-pin connector) to supply dedicated power for the processor. For high-end motherboards and processors, more power is required, therefore EPS12V has an 8 pin connector.
3. 4-pin Peripheral power connectors (Molex): These are the other, smaller connectors that go to the various disk drives of the computer. Most of them have four wires: two black, one red, and one yellow. Unlike the standard mains electrical wire color-coding, each black wire is a ground, the red wire is +5 V, and the yellow wire is +12 V.
4. Serial ATA power connectors: a 5-pin connector for components which use SATA power plugs. This connector supplies power at three different voltages: +3.3, +5, and +12 volts.
5. 6-pin Most modern computer power supplies include 6-pin connectors which are generally used for PCI Express graphics cards, but a newly introduced 8-pin connector should be seen on the latest model power supplies. Each PCI Express 6-pin connector can output a maximum of 75 W.

Efficiency of the computer power supply

Computer power supplies efficiency is generally about 70–75% efficient. That means in order for a 75% efficient power supply to produce 75 W of DC output it would require 100 W of AC input and dissipate the remaining 25 W in heat. Higher-quality power supplies can be over 80% efficient; higher energy efficient PSU’s waste less energy in heat, and requires less airflow to cool, and as a result will be much quieter. As of 2007, 93%-efficient power supplies are available.

For more information visit en.wikipedia.org/wiki/Computer_power_supply

In addition to cost, data center security comes into play with site selection. Are you looking for an urban facility, near your headquarters and employees — or are you looking for suburban real estate prices and security? Do you want to build new or renovate an existing facility? Have you considered a truck dock for equipment delivery and adequate parking? Where will your facility be located in relation the floodplain, tornado or hurricane paths, fault lines or airports?
But site selection is only the first piece of the puzzle. Building out a data center environment can include updating wiring, power conditioning, cooling and physical structures like raised floors.

2. Data center power management

Managing data center power supply becomes a matter of preparing for “when” not “if” your power will go down. But in the midst of an outage, the best laid contingencies can fall through. That’s why you need to check out our information on maintaining equipment and policies for reliable power.

Traditionally, power consumption has been a cost of doing business, well within the realm of facilities management. But as both the price and demand for power continue to rise, it’s a problem IT can no longer afford to ignore and there is mounting pressure on data center managers to address the issue. Read on to learn more about the new technologies and efficiency measures that might stem the tide of surging energy bills.

3. Data center cooling

The temperature in your data center is rising. You buy more air conditioning (AC) units to handle the data center cooling load, but you’ve still got hot spots. Where is all that cold air going?

If this problem sounds familiar to you, you’re not alone. According to recent studies, your data center could be wasting anywhere from 25% to 60% of its cooling capacity. Unfortunately, installing extra air conditioning to cool down your data center hot spots is like replacing one headache with another.
This isn’t an easy issue for IT management to get a handle on — data center cooling isn’t about bits and bytes, it’s about thermodynamics, engineering, and getting down and dirty with the raised floor in your facility.

For more information visit searchdatacenter.techtarget.com